Moisture Analyzers DBS 60-3 Kern

Moisture Analyzers DBS 60-3 Kern

Data sheet

Weighing range [ Max ]

60 g

Readout [ d ]

1 mg

Reproducibility

1 mg

Linearity

3 mg

Option Verification

-

Option Calibration 

+

Certificate

More info

Drying program

Previous drying time

Current temperature

Unit of the shown result, e.g. moisture

Current moisture content in %

Drying mode/Status display drying

Halogen quartz glass heater 400 W

Observation window above the sample, useful during initial setting

Internal memory for automatic run of 10 drying programs and 100 drying processes already executed

The last value measured remains on the display until it is replaced by a new measurement

Sample description for up to 99 samples, 2 digits, freely programmable,and is printed in the measuring protocol

Date and time display as standard

10 sample plates included

Application handbook: There are many practical examples in the user manual

Features

Adjusting program ( CAL ) : For quick setting of the balance's accuracy. 

External adjusting weight required.

Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc.

Data interface RS-232 : To connect the balance to a printer, PC or network

GLP/ISO log: with weight, date and time. only with KERN printers, see Accessories

Weighing units : Can be switched to e.g. nonmetric units at the touch of a key. See balance model.

Mains part : mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA.

Electromagnetic force compensation: A counterforce is created by means of a coil in a permanent magnet. This counterforce is the same as the load of the weight being measured on the scale a

3 years warranty

USB data interface: To connect the balance to a printer, PC or other peripherals.

Options

Calibration certificate possible. The time required for calibration is 3-4 days