Aditeg OS-6103 100MHz Analog Oscilloscope

Aditeg OS-6103 100MHz Analog Oscilloscope

Product Specification

CRT

• Type 6″ rectangle, internalgraticule, 0%, 10%, 90% and 100% marks
• Display area 8 x10DIV (DIV=10mm)
• Accelerating potential 16kV approx
• Illumination Continuously adjustable at front panel
• Coupling: DC
• Sensitivity: 5V or more
• Maximum input voltage:30V(DC+AC peak) at 1kHz or less
• Z-axis input
• Bandwidth: DC~5MHz

VERTICAL SYSTEM

• Sensitivity 2mV~5V/DIV, 11 steps in 1-2-5 sequence
• Sensitivity accuracy ≤3% (5 div at the center of display)
• Vernier vertical sensitivity Countinuously variabble to 1/2.5 or less of panel-indicate value
• Width of band (-3dB) DC ~100MHz(2mV/div: DC~20MHz)
• Rise time 3.5ns (2mV/div:17.5ns)
• Singal delay Leading edge can be monitored
• Input Coupling AC, DC, GND
• Input Impedance 1MΩ±2% / Approx 25pF
• Vertical mode CH1, CH2, DUAL(CHOP/ALT), ADD, CH2 INV
• Bandwidth limited 20MHz
• Common-mode rejection ratio 50:1 or better at 50kHz
• Dynamic range 8 div at 100MHz

HORIZONTAL SYSTEM

• Horizontal modes MAIN(A), ALT, DELAY(B)
• A(main) sweep time 50nS~0.2S/div, continuously variable(UNCAL)
• B(delay) sweep time 50ns~50ms/div
• Sweep accuracy ±3%, ±5% at x10MAG
• Sweep magnificaton x10MAG (maximum sweep time 5ns/div)
• Delay time 1us~5s
• Delay jitter Better than 1:20000
• Alternate separation Variable

X-Y OPERATION

• Mode X-axis: selectable CH1, CH2, EXT
• Y-axis: selectable CH1, CH2, CH1 and CH2
• Sensitivity and Accuracy 2mV~5V/DIV, ±3%; EXT:0.1V/div±5%
• X-axis bandwidth DC~500kHz(-3dB)
• Phase Error 3° or less from DC~50kHz

OUTPUT SIGNAL

• Voltage: approx.25mV/div into 50Ω
• Trigger signal output
• Frequency response: DC~10MHz
• Calibrator output 1kHz square wave, 2Vpp±2%

CURSOR READOUT FUNCTION

• Cursor measurement function ΔV, ΔV%, ΔVdB, ΔT, 1/ΔT, ΔT%, Δθ
• Cursor resolution 1/100 DIV
• Effective cursor range Vertical:±3 div; Horizontal: ±4 div
• Panel setting display
• Vertical: V/div(CH1, CH2), UNCAL, ALT/CHOP/ADD, INV, probe
• factor, AC/DC/GND
• Horizontal: s/div(MTB,DTB), UNCAL, x10MAG, delay time, HO
• Trigger: source, coupling, slope, level, TV-V, TV-H
• Others: X-Y, lock, save/recall MEM 0-9

SPECIAL FUNCTION

• TIME/DIV Auto range Provided
• Panel setting save & recall 10 sets
• Panel setups lock Provided
• POWER SOURCE 110~127 VAC±10%, 220~240VAC±10%, 50Hz±2Hz / 60Hz±2Hz
• ACCESSORIES Instruction manual x 1, Power cable x 1, Probe x 2 ,Fuse x1
• DIMENSIONS & WEIGHT 10(W) x 140(H) x 400(D)mm, Approx. 8kg