HANNA PRIMO3 Pocket TDS/Temperature Tester (0 to 1999ppm)

The PRIMO3 is ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonstrating the before and after results of conditioning and filtration systems.

Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.

Operating and routine maintenance has never been easier. Primo 3 uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo 3 automatically enters calibration mode. Simply open a sachet of calibration solution, dip the probe in, and within seconds the meter recognises the calibration solution and calibrates itself!

• Water quality testing

• Robust pocket-sized tester
• Fast and dependable

• 1m cable probe connection
• Automatic calibration
• Automatic Temperature Compensation
• Easy to read LCD

• Range		0 to 1999 ppm (mg/L); 0.0 to 60.0°C
  Resolution		1 ppm (mg/L); 0.1°C
  Accuracy		±2% F.S.; ±0.5°C
  Calibration Solution		HI 70032P
  Calibration		automatic, at 1382 ppm
  Temperature Compensation		Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C
  Battery Type / Life		2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use
  Environment		0 to 50°C (32 to 122°F); RH max 95%
  Dimensions		66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter only
  Weight		115 g (4.1 oz.)