HANNA PRIMO5 Pocket Conductivity Tester (0 to 1999uS)

The PRIMO5 is ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonstrating the before and after results of conditioning and filtration systems.

• Robust pocket-sized tester
• Direct probe connection
• Automatic calibration
• Automatic Temperature Compensation

• The Primo5 uses a single button at the top of the meter.
• Press the button once and the meter is powered and ready for use.

• Simply press and hold the button for a few seconds and the meter automatically enters calibration mode.
• Open a sachet of Hanna calibration solution and dip the probe directly into the sachet.
• Within seconds the meter recognises the calibration solution and will calibrate itself.

• Batteries
• Instructions
• 1 x 20 mL sachet of HI-70031 calibration solution

• Range		0 to 1999 µS/cm
  Resolution		1 µS/cm
  Accuracy		±2% F.S.
  Calibration Solution		HI 70031P
  Calibration		automatic, at 1413 µS/cm
  Temperature Compensation		Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C
  Battery Type / Life		2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use
  Environment		0 to 50°C (32 to 122°F); RH max 95%
  Dimensions		180 x 50 x 25 mm (7.1 x 2.0 x 1.0")
  Weight		50 g (1.8 oz.)