INCUBATOR IN55 MEMMERT

 INCUBATOR IN55  MEMMERT

Specifications:
- Natural convection
- Temperature  Range :  5° C above ambient up to + 80° C
- Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
- Vent connection with restrictor flap
- Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
- Self-diagnostics for fault analysis
- 1 Pt100 sensor DIN class A in 4-wire-circuit
- Digital timer adjustable from 1 minute to 99 days
- Parameters adjustable on ControlCOCKPIT: temperature ( Celsius or  Fahrenheit)
- SetpointWAIT function - the process time does not start until the set temperature is reached
- Resolution of display for setpoint and actual temperature values 0.1° C
- Calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
- Programme stored in case of power failure
- Incl. works calibration certificate for + 37° C
- Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12 880 to switch off the heating approx. 20° C above nominal temperature
-Dimensions ( External )  585 x 787 x 514 mm  ( w x h x d )
- Fully insulated stainless steel door with 2-point locking ( compression door lock)
- Inner glass door
- Rear zinc-plated steel .
- Internal dimensions :  400 x 400 x 330 mm ( w x h x d ) , Cap Volume :  53 l
- Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
- 1 stainless steel grid
- Max. loading of chamber: 80 kg
- 230 V ( + / - 10% ) , 50/ 60 Hz / approx. 1.000 W.

PT OCTA PRIMA LESTARI
Rukan Mitra Matraman Blok B-12 . Jl. Matraman Raya No. 148 Jakarta 13150    .
Tlp : 85918154-55  , 8512595  & 85902391 . HP 0813 988 55242
Fax : 85918178    
email : e_anasthasia@octaprimalestari.com    
Website : www.octaprimalestari.com