Chiller

Feature
 
The main body and the outdoor unit are separated. The main body to be installed indoors consists of a water tank and a water pump and the electricity control part, while the outdoor unit includes a heat-generating condenser and a noise-generating compressor

▶ There is no restriction in its installation location as the heat-generating unit is installed outdoors, not to cause the indoor temperature to increase even when the system is installed in a limited indoor space
▶ The noise-generating sources are installed outdoors, allowing the chiller main body to be installed at any indoor places
▶ The system is developed on our own and equipped with a large cold storage capacity, allowing the temperature to vary only within a short range. The system is highly effective in saving the operation costs as the chiller needs to be started less frequently
▶ Detection and indication of the low level in the bath, and indication of the pump pressure and warning for pressure increase, both of which make it possible to use the system safely
▶ For the chiller, the pressure gauge and the pressure cutoff unit and the overcurrent cutoff unit are to be installed indoors, making it possible to respond to the need of maintenance work as well as to the failures quickly and conveniently

Specification