Dwyer 2300-60Pa Magnehelic® Differential Pressure Gage

Service: Air and non-combustible, compatible gases. ( Natural Gas option available.)
Wetted Materials: Consult factory.
Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.

Range : 30.0.30Pa
Accuracy: ± 2% of FS ( ± 4% on -00) throughout range at 70° F ( 21.1° C) .
Pressure Limits: -20 in Hg. to 15 psig.† ( -0.677 bar to 1.034 bar) ; MP option; 35 psig ( 2.41 bar) , HP option; 80 psig ( 5.52 bar) .
Overpressure: Relief plug opens at approximately 25 psig ( 1.72 bar) , standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits: 20 to 140° F.* ( -6.67 to 60° C) .
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/ 8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight: 1 lb 2 oz ( 510 g) ; MP & HP 2 lb 2 oz ( 963 g) .
Standard Accessories: Two 1/ 8" NPT plugs for duplicate pressure taps, two 1/ 8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. ( Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval: RoHS. ( Note: -SP models not RoHS approved.)