Oil Sorbent Lembaran Size 38 x 51 Cm.

Sorbents are insoluble materials or mixtures of materials used to recover liquids through the mechanism of absorption, or adsorption, or both. Absorbents are materials that pick up and retain liquid distributed throughout its molecular structure causing the solid to swell ( 50 percent or more) . The absorbent must be at least 70 percent insoluble in excess fluid. Adsorbents are insoluble materials that are coated by a liquid on its surface, including pores and capillaries, without the solid swelling more than 50 percent in excess liquid. To be useful in combating oil spills, sorbents need to be both oleophilic ( oil-attracting) and hydrophobic ( water-repellent) . Although they may be used as the sole cleanup method in small spills, sorbents are most often used to remove final traces of oil, or in areas that cannot be reached by skimmers. Sorbent materials used to recover oil must be disposed of in accordance with approved local, state, and federal regulations. Any oil that is removed from sorbent materials must also be properly disposed of or recycled.

Sorbents can be divided into three basic categories: natural organic, natural inorganic, and synthetic.

Natural organic sorbents include peat moss, straw, hay, sawdust, ground corncobs, feathers, and other readily available carbon-based products. Organic sorbents can adsorb between 3 and 15 times their weight in oil, but there are disadvantages to their use. Some organic sorbents tend to adsorb water as well as oil, causing the sorbents to sink. Many organic sorbents are loose particles such as sawdust, and are difficult to collect after they are spread on the water. These problems can be counterbalanced by adding flotation devices, such as empty drums attached to sorbent bales of hay, to overcome the sinking issue, and wrapping loose particles in mesh to aid in collection.

Natural inorganic sorbents consist of clay, perlite, vermiculite, glass wool, sand, or volcanic ash. They can adsorb from 4 to 20 times their weight in oil. Inorganic sorbents, like organic sorbents, are inexpensive and readily available in large quantities. These types of sorbents are not used on the water' s surface.

Synthetic sorbents include man-made materials that are similar to plastics, such as polyurethane, polyethylene, and polypropylene and are designed to adsorb liquids onto their surfaces. Other synthetic sorbents include cross-linked polymers and rubber materials, which absorb liquids into their solid structure, causing the sorbent material to swell. Most synthetic sorbents can absorb up 70 times their own weight in oil.

Hub. 0857 1633 5307./ 021-99861413. Email : pdglobalsafety@ yahoo.comHub. 0857 1633 5307./ 021-99861413. Email : pdglobalsafety@ yahoo.comHub. 0857 1633 5307./ 021-99861413. Email : pdglobalsafety@ yahoo.com