Aquamatic A100 And A200 Stager Controls

Aquamatic stager internal parts are consturcted of durable, non-corroding, self-lubricating material for long, maintenance-free life. The A100 controls have an intergal time lock, which is programmed to begin the regeneration process.The A200 control is initiated when an electrical signal is provided.Cycle times are programmable to accommodate a wide range of filter and softener applications.

Standrad Features

* Homing Operation-stager returns to service whenever timer is in service position
* NEMA 1 enclosure-NEMA 4 and NEMA 4XFG also available
* 120 VAC/ 60Hz 200 VAC/ 50Hz, 220VAC/ 60Hz and 24 VAC/ 5-Hz also available
* Choice of six-day or seven-day timer for A100
* Maximum Of 10 Cycles programmable in three minute increments

Optional Features

* External push-button for manual start( A200 only)
* Status Lights
* contact closure( dry or powered) can be provided during a cycle on all models

Specifications

* Power Requirements 120VAC/ 60 Hz/ 3 watts

220 VAC/ 50 Hz/ 3 watts

220 VAC/ 60 Hz/ 3 watts

24 VAC/ 50 Hz/ 3 watts

* initiation Signal( A200 only) Line voltage( minimum of three-minute signal duration)
* Stager Port Sizes All inlet, control and drain ports 1/ 8-inch NPT threads
* Control Fluid Air or Water ( 100 micron strainer recommended)
* Control Temperature 140F ( 60C)
* Control Pressure 125 psi( 8.6 bar)
* Enclosure Options NEMA 1 ( metal)

NEMA 4 ( metal)

EMA 4XGF ( fiberglass)