MT 5500 Garrett Metal Detector Walkthru

Operating Temperatures
-4°F (-20°C) to + 158°F (70°C); Humidity: To 95% noncondensing.
Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 55 watts; no rewiring,
switching or adjustments required.
Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures,"
IEC 529.
Interference Suppression
100% sensor coil Faraday shielding; RFI interference reduced with
hardware; special Garrett built-in circuitry for noise supression and
ignoring x-ray monitors. Physical interference minimized by coil design
and circuitry.
Traffic Counter
Built-in and resettable with current reading available on LCD panel.
Synchronization
Multiple channels permit several MT 5500s and other Garrett detectors to
operate simultaneously in close proximity.
Alarms
Ready light indicates unit is operational; alarm lights and audible alarms
are activated when the target amount of metal is detected; location of
alarm lights on left and right side of display combined with variable tone
indicates which side of the person the target is located.
Tamper-Proof
Dual-level access codes required to set or change all sensitivity settings
and detection programs; one level for use by supervisors in selecting
programs and sensitivity and the other for initial set-up and overall control;
non-resettable sequence code logs all changes made whenever sensitivity
codes are accessed. An audible alarm reports unauthorized attempts
at access.
Infrared Sensor
Improves analysis of detection signal; increases throughput; helps
eliminate "false alarms" and also provides accurate traffic counter.
Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms
and control devices.
Masking
Programs designed to eliminate the problem of dissimilar targets canceling
each other.
Construction
Attractive scratch and mar-resistant laminate with resilient end caps;
control panel and cross members made of heavy duty aluminum.