Compresor Danfoss Maneurop MT125 HU4DVE { 10HP}

Compressor Danfoss Maneurop MT125 Type : MT 01. Model number ( on compressor nameplate) MT125HU4DVE 02. Suction connection 1-3/ 4" Rotolock 03. Discharge connection 1-1/ 4" Rotolock 04. Suction connection with supplied sleeve 1-1/ 8" ODF 05. Discharge connection with supplied sleeve 3/ 4" ODF 06. Oil sight glass Threaded 07. Oil equalisation connection 3/ 8 flare SAE 08. Oil drain connection None 09. LP gauge port Schrader 10. Internal pressure relief valve 30 bar / 8 bar 11. Cylinders - 12. Swept volume 215.4 cm3/ rev 13. Displacement at 50 Hz 37.5 m3/ h 14. Displacement at 60 Hz 45.2 m3/ h 15. Nominal speed at 50 Hz 2900 rpm 16. Nominal speed at 60 Hz 3600 rpm 17. Nominal voltage at 50Hz 380-400V/ 3/ 50Hz 18. Nominal voltage at 60 Hz 460V/ 3/ 60Hz 19. Voltage range at 50 Hz 340-440 V 20. Voltage range at 60 Hz 414-506 V 21. Winding resistance ( between phases) 1.57 Ohm 22. Winding resistance ( between phases 1-2) 1.57 Ohm 23. Winding resistance ( between phases 1-3) 1.57 Ohm 24. Winding resistance ( between phases 2-3) 1.57 Ohm 25. Main winding resistance - 26. Start winding resistance - 27. Maximum Continuous Current ( MCC) 27 A 28. Maximum Must Trip current ( MMT) - 29. Locked Rotor Current ( LRA) 105 A 30. Motor protection Internal overload protector 31. Net weight 64 kg 32. Oil charge 4 litre 33. Oil type Mineral - 160P 34. Approved refrigerants R22, R417A-160PZ 35. Refrigerant charge limit 10 kg 36. Approvals ( CE) CE certified 37. Approvals ( UL) UL certified ( file SA6873) 38. Approvals ( CCC) - 39. Maximum system test pressure LP side 25 bar( g) 40. Maximum system test pressure HP side 30 bar( g) 41. Maximum differential test pressure 30 bar 42. Maximum number of starts per hour 12 .