Jual alat ukur industri,agen indonesia Hanna HI 8410

CALL: A.WIHARTA 081294124885 085778084789 087784022201 Tags: HANNA Murah, HANNA Jakarta, Agen HANNA, HANNA Indonesia, Distributor HANNA, HANNA Berkualitas, Promo HANNA, Supplier HANNA, HANNA Refair. Agen Murah, Distributor Indonesia, BERBAGAI Merek alat alat Laboratorium Dan instrumen sbb: RION, BestScope, Hioki, Extech, Davis, Weather Station, Fluke ,, Boeco, Constant, Hach, Brookfield, Irtek, GE Druck, Kett, Kyoritsu, Kern, Lutron, megger, Nytech, Ohaus, Schoot Instrumen, Hanna Instrument, Atago, AMPROBE, Ebro, Dwyer, Memmert, Eutech, Ika, Kanomak, Karya Mandiri Instrument indonesia adalah supplier peralatan laboratorium baik eletronik maupun mekanik, serta berbagai macam instrument measurement, dengan didukung dari berbagai macam merk dari negara negara Eropa, US, dan beberapa negara di Asia seperti Korea, Japan dan Taiwan. Instrument yang kami sediakan seperti : Anemometer, Analitical Balance, Spectrophotometer, pHmeter, Laser survey, Micropipette, Peristaltic Pump, Flame photometer, Water bath heating cooling, Colorimeter, Water Strirer, Viscometer. Freezers, Refractometer, Polarimeter, Sound Level meter, Tachometer. Dll Kami juga menerima jasa service dan kalibrasi untuk peralatan laboratorium sesuai kemampuan kami.     The HI 8410 is a panel mounted dissolved oxygen controller that is used to maintain and monitor the concentration of DO in a wide range of industrial process applications. The HI 8410 uses a Galvanic probe that typically requires less maintenance than a Polarographic style making it ideal for long term monitoring. The set point for controlling the activation of a relay is adjusted manually by the user. An alarm relay is also manually adjustable and is based upon a tolerance from the programmed set point. Calibration is single set point and can be done in zero oxygen solution. The dosage mode: automatic, continuous ON or OFF and over dosage control by setting the overtime dosage trimmer. If the dosing relay remains continuously activated for more than the selected dosing time, the alarm relay is activated, the alarm LED will start blinking and the dosing relay will be deactivated. A jumper found on the rear panel can disable the “ over time dosage” function. " Automatic/ Off/ manual " dosing selection switch and LED on the front panel. In Automatic mode all the relays are controlled based on the measurement set point and alarm values. In OFF mode the dosing and alarm relays are always deactivated. The dosing LED is OFF ( as relay status) and the ALARM LED is in accordance with the instrument set point, input reading, and ALARM. In ON ( Manual) mode the dosing relay is always on. The alarm relay is still enabled. If an alarm occurs the dosing relay remains activated. If the over dose time exceeds the setting during manual mode, the alarm relay remains activated. The D.O. probe is provided with a membrane covering the galvanic sensor and a built-in thermistor for temperature measurement and compensation. Other features include: recorder output in 0-20 mA or 4-20 mA configuration, LED indicators which identify whether the controller is in operation mode or setup selection mode, overtime control function and hysteresis setting. Order Information: The HI 8410 is supplied complete with mounting brackets and instructions.