FLUKE 9143 Metrology Well Temperature Calibrator

CALIBRATOR The Fluke 9143 Field Metrology Well extends high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance. It is packed with functionality and are remarkably easy to use. Moreover it is lightweight, small, and quick to reach temperature set points, yet it is stable, uniform, and accurate. This industrial temperature loop calibrator is perfect for performing transmitter loop calibrations, comparison calibrations, or simple checks of thermocouple sensors. With the “process” option, there is no need to carry additional tools into the field. Key Features & Specifications - Lightweight, portable, and fast - Temperature range: 33°C to 350°C - Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current - True reference thermometry with accuracy to ±0.02°C - On-board automation and documentation - Metrology performance in accuracy, stability, uniformity, and loading Base Unit Specifications Temperature range at 23°C    –25°C to 150°C (–13°F to 302°F) Display accuracy    ±0.2°C full range Stability    ±0.01°C full range Axial uniformity at 40 mm (1.6 in)    ±0.05°C full range Radial uniformity    ±0.01°C full range Loading effect (with a 6.35 mm reference probe and three 6.35 mm probes)    ±0.006°C full range Hysteresis    0.025 Operating conditions    0°C to 50°C, 0% to 90% RH (non-condensing) Environmental conditions (for all specifications except temperature range)    13°C to 33°C Immersion (well) Depth    150 mm (5.9 in) Insert OD    30 mm (1.18 in) Heating time    16 min: 23°C to 140°C  23 min: 23°C to 150°C 25 min: –25°C to 150°C Cooling time    15 min: 23°C to –25°C  25 min: 150°C to –23°C Resolution    0.01° Display    LCD, °C or °F user-selectable Size (H x W x D)    290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in) Weight    8.16 kg (18 lb) Power requirements    100 V to 115 V (±10%) 50/60 Hz, 635 W 230 V (±10%) 50/60 Hz, 575 W Computer interface    RS-232 and 9930 Interface-it control software included -P Specifications Built-in reference thermometer readout accuracy (4-Wire Reference Probe)1    ±0.010°C at -25°C  ±0.015°C at 0°C ±0.020°C at 50°C ±0.025°C at 150°C ±0.030°C at 200°C ±0.040°C at 350°C ±0.050°C at 420°C ±0.070°C at 660°C Reference resistance range    0 ohms to 400 ohms Reference resistance accuracy2    0 ohms to 42 ohms: ±0.0025 ohms 42 ohms to 400 ohms: ±60 ppm of reading Reference characterizations    ITS-90, CVD, IEC-751, Resistance Reference measurement capability    4-wire Reference probe connection    6-pin Din with Infocon Technology Built-in RTD thermometer readout accuracy    NI-120: ±0.015°C at 0°C  PT-100 (385): ±0.02°C at 0°C PT-100 (3926): ±0.02°C at 0°C PT-100 (JIS): ±0.02°C at 0°C RTD resistance range    0 ohms to 400 ohms RTD resistance accuracy2    0 ohms to 25 ohms: ±0.002 ohms  25 ohms to 400 ohms: ±80 ppm of reading RTD characterizations    PT-100 (385),(JIS),(3926), NI-120, Resistance RTD measurement capability    4-wire RTD (2-,3-wire RTD w/ Jumpers only) RTD connection    4 terminal input Built-in TC thermometer readout accuracy    Type J: ±0.7°C at 660°C Type K: ±0.8°C at 660°C Type T: ±0.8°C at 400°C Type E: ±0.7°C at 660°C Type R: ±1.4°C at 660°C Type S: ±1.5°C at 660°C Type M: ±1.4°C at 660°C Type L: ±0.7°C at 660°C Type U: ±0.75°C at 600°C Type N: ±0.9°C at 660°C Type C: ±1.1°C at 660°C TC millivolt range    –10 mV to 75 mV Voltage accuracy    0.025% of reading + 0.01 mV Internal cold junction compensation accuracy    ±0.35°C (ambient of 13°C to 33°C) TC connection    Small connectors Built-in mA readout accuracy    0.02% of reading + 2 mV mA range    Cal 4-22 mA, Spec 4-24 mA mA connection    2 terminal input Loop power function    24 V DC loop power Built-in electronics temperature coefficient (0°C to 13°C, 33°C to 50°C)    ±0.005% of range per °C