CONCEPT Electronics Engineering CD400 Tachograp

TACHOMETER Tachograph Programmer CD400 Functions: W figure determination on measuring track (with optional photo-cell) or rolling road. K figure measure on KTCO 1314, KTCO 1318 and FTCO1319. Parameter programming. Activation and deactivation of IMS (Independent Motion Signal). Activation and deactivation of VDO counter. Odometer reset and adjustment (mileage correction). Speed simulation and customizable automatic test diagram. DTCS reading (Digital) and erasing. Sensor pairing (KITAS activation). Clock test. Workshop card’s PIN recording and input through CD400. Tachograph Programmer CD400 Advantages: No power connection nor battery charging required, the only tester powered by the tachograph itself. Compact size, the smallest tachograph tester on the market. User friendly, clear 4 lines menus, no training required. Automatic tachograph model detection on power on. Double accuracy of the W factor measure on track by detecting half pulses. The only tester being able to reset the odometer and change the sender type on the VR2400. Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC. Tachograph Programmer CD400 Technical Specifications: Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char) White LED backlight Size: 150 x 100 x 45 mm Supply voltage: 9 to 30 VDC Supply current: 12mA Case: green-blue ABS (IP40). Operating temp: -20…+70°C Weight: 155g     Package included: 1pc x CD400 – Tacho Programmer 1pc x Cable for 1319 1pc x Cable for 13ХХ/1318, V.Root 8400 1pc x Cable for EGK-100 1pc x Cable for 1324 1pc x Cable for V.Root 2400 1pc x Cable for CA-RS232-1 1pc x Cable for Digital Tacho