DELTA OHM Model HD2013R Heated Rain Gauge

WEATHER STATION Heated Rain gauge with tipping bucket, area 400 cm2, temperatures from +4°C to +60°C Power voltage 12Vdc or 24Vdc ±10% / absorption 35W.  Resolution on request, at the time of placing the order 0.1, 0.2 or 0.5 mm. Output contact normally closed.  The HD2013 is a reliable and sturdy bucket rain gauge, built entirely from corrosion resistant materials in order to guarantee its durability. So as to ensure accurate measurement even with low temperature climatic conditions or during and after precipitations of snow, a version with a heater which is automatically activated around +4°C has been developed so that snow deposits and ice formations are prevented. The rain gauge is formed by a metal base on which a tipping bucket is set. The rain collector cone, fixed to the aluminium cylinder, channels the water inside the tipping bucket: once the predefined level is reached, the calibrated bucked  rotates under the action of its own weight, discharging the water. During the rotation phase, the usually closed reed contact opens for a fraction of a second, sending an impulse to the counter.  The quantity of rainfall measured is based on the count of the number of times the bucket is emptied: the reed contacts, usually closed, open at the moment of  the rotation between one bucket’s section and the other. The number of impulses  can be detected and recorded by a datalogger such as the HD2013-D DeltaOhm or by a pulse counter. Includes: Delta Ohm HD2013R Heated Rain Gauge HD2013-D Datalogger HD2003.77/40: Flange to fasten the datalogger to the support staff Specifications: Power: 12Vdc or 24Vdc ±10% / 35W.  Type of output contact:  NC contact (opens during commutation). Resolution:  0.1 - 0.2 or 0.5 mm/commutation (on request at the time of placing the order).  Precision : ± 2% between 20÷300 mm/h.  Operating temperature range:  -20°C ... +60°C. Heater intervention temperature: +4°C.  Protection degree:  IP67.  Collector area: 400 cm2.