FIELDSCOUT SC900 Soil Density Compaction Meter

GRAIN MOISTURE METER Soil Compaction meters are used to determine the density of soil and other material. An operator pushes a rod with attached ( ASAE standard) cone into the ground. The resistance of the cone as it is pushed in the ground is measured and recorded in the memory of the compaction meter. The depth of the cone below soil surface is also measured and recorded in memory. Compaction data is recorded and displayed at one inch intervals, in PSI or kPa. Built-in datalogger eliminates the need to record data manually. Included software allows user to download data, change logger settings and configure the meter. Measure, log, and review data with the SC-900 Soil Compaction Meter to make better soil management decisions based on data specific to your field. Identify and address specific problem areas on-site and in real time. Features: Measurement Units: Cone Index ( PSI or kPa)  Resolution: 1 in ( 2.5 cm) , 5 PSI ( 35 kPa)  Accuracy: ± 0.5 in ( 1.25 cm) Depth, ± 15 PSI ( 103 kPa) Pressure Range: 0 to18 in ( 0 to 45 cm) , 0 to 1, 000 PSI ( 0 to 7, 000 kPa)  Battery/ Life: 4 AAA alkaline batteries; approximately 12-month life Data Logger Capacity: 772 profiles without GPS; 579 profiles with GPS