OHAUS MB35 Moisture Analyzers

GRAIN MOISTURE METER The MB35 features a maximum sample capacity of 35g, with a readability of 0.002g and repeatability to 0.02% ( 10g sample) . The intuitive software establishes a simple user interface with simple 3 key navigation for easy setup. The MB35 offers a straightforward one step testing procedure. The LCD display shows % moisture, actual weight, and actual temperature and test time. Description:  Ohaus Moisture Balance Perfect for pharmaceutical, chemical, environmental, food and beverage industries Gives you the flexibility and accuracy required for moisture content determination Designed with GLP protocol and is perfect for quality assurance applications. Fast halogen element provides uniform infrared heating up to 160º C in less than 1 minute Analytical performance, with a readability of 5.0 mg, 0.05% moisture and 35 gram capacity Simple fast 3 key operation Heating at Light Speed, up to 40% faster than traditional infrared methods Infrared halogen technology begins drying your sample in seconds. The unique gold reflective housing serves to create a more uniform distribution of heat, improving analyzer accuracy Standard RS232 output for GLP printing and PC communications Flexible performance Provides accurate results at 0.02% readability It is ideal for textiles, wastewater, ceramics, food and other applications Simple to operate Easy to clean Has a compact design Use only in closed rooms Improve process control Increase profits Durable construction Complies with AOAC Official Methods Languages: English Specification:  Capacity: 35g Readability: 0.005g, 0.05%  Temp. Settings: 50° to 160° ( 5° increments)  Drying Programs: Standard Switch-off Criteria: Timed, Auto Heat Source: Halogen Calibration: External calibration mass-20g Pan Size: 90 mm. diameter Shipping Weight ( lb/ kg) : 14.1/ 6.4 Temperature Range: 5° C to 40° C Atmospheric humidity: 80% rh @ to 30° C Warm-up time: At least 60 minutes after connecting the instrument to the power when switched on from standby-mode, the instrument is ready for operation immediately. Voltage fluctuations: -15% + 10%  Installation category: II Pollution degree: 2 Power load: Max. 450 W during drying process Current consumption: 4 A or 2 A, according to the heating element Power line fuse: 1 piece, 5 x 20mm, T6, 3 H 250V