SIEMENS SITRANS MAG 5100W Series Electromagnetic Flowmeter

FLOW METER The SITRANS F M MAG 5100 W with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, cooling water, waste water, sewage or sludge applications. In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:  SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate The sensor can be combined with the energy calculator SITRANS FUE950 Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter. Detail Meassuring range     0 to 10 m/ s Nominal Sizes     From DN 15 to DN 2000 ( 1 " to 78 " )  Accuracy     0.2 % ± 2.5 mm/ s Operating Pressure     Max. 16 bar ( Max. 150 psi)  Ambient temperature     From -40 to 70 ° C ( -40 to 158 ° F)  Medium Tempreature     From -10 to 70 ° C ( 14 to 158 ° F)  Liners EPDM NBR hard rubber Ebonite hard rubber Electrodes     Hastelloy C-276 Built-in grounding electrodes Material     Carbon steel, with corrosion resistant two-component epoxy coating Drinking Water Approvals     EPDM: WRAS, NSF/ ANSI Standard 61, DVGW 270,  ACS and BelgAqua NBR: NSF/ ANSI Standard 61, WRAS Ebonite: WRAS Custody Transfer Approvals     OILM R 49 MI-001 PTB K7.2 ( Germany)  BEV OE12/ C040 ( Austria)  General approval     MCERTS Sira Certificate No. MC080136/ 00 Benefits Short lead time Rugged NBR hard rubber liner for all water and wastewater applications EPDM liner specifically for drinking water applications requiring special approvals Ebonite liner for drinking water, water and wastewater applications Increased low flow accuracy for water leakage detection ( NBR or EPDM liner)  Suitable for direct burial and constant flooding ( IP68)  Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint